QUICKEE 4#

※composition pure impurities less

The high-efficiency slag remover produced by our company is a neutral substance. The main material comes from volcanic silicate minerals. The main components are silicon dioxide (SiO2), aluminum oxide (AL2O3) and other trace substances. It can quickly and effectively aggregate and adsorb scum and slag on the surface of metal solution, and its chemical properties are stable, and it will not produce secondary pollution to metal melt. The high-efficiency slag remover has been recognized by the majority of users as a slag remover and thermal insulation agent for steel smelting and casting.

① Ensure the cleanliness of molten iron to avoid slag inclusion in castings

High-efficiency slag remover can be used in ladle, tundish and electric furnace. After being evenly spread on the surface of molten liquid by manual or spray gun, it can quickly gather into slag shell easily separated from metal solution with a little push. Pure molten iron can be obtained by stripping off the slag shell, various slag and impurities in iron aqueous solution can be removed, so as to ensure the cleanliness of molten iron, avoid slag inclusion in castings and improve quality.

② Isolate air to reduce loss

High-efficiency slag remover slag shell thermal conductivity is low, under its cover, on the one hand, as a good thermal insulation layer on the surface of the metal melt can reduce the heat loss of the solution, which is an excellent thermal insulation covering agent for intermediate subcontracting or metal solution that needs to be parked for a long time. On the other hand, the contact between air and high temperature molten iron (or molten steel) is isolated, which greatly reduces the burning loss of alloy elements.

③ Improve casting quality and reduce casting scrap rate

High-efficiency slag remover has been tested by a large number of customers of different products, showing fast reaction time, good adhesion and no slag. At the same time, in order to meet the needs of different production processes, the slag remover also achieves the purpose of reducing harmful elements such as phosphorus and sulfur by adding other substances, reducing the influence of harmful elements such as phosphorus and sulfur in metal liquid, eliminating casting slag, improving casting quality and reducing casting scrap rate.

④ Easy to crust High cost performance

and hot metal contact reaction is stable, no splash, non-stick bag, no wall. The slag iron separation effect is good, the slag discharge is simple, the slag removal is clean, and no scattered floating objects are left; the slag has strong ability to gather, easy to crust, and high cost performance.

⑤ does not affect its chemical composition and mechanical properties of castings

When using smoke-free, non-toxic, tasteless, do not produce smoke sit, do not affect human health, keep the workshop clean environment. And high-efficiency slag removal agent for molten metal pollution, no penetration, does not affect its chemical composition and mechanical properties of castings.

⑥ See the following table for main components:

Ingredients

SiO₂

AL₂O₃

Fe₂O₃

CaO

K₂O

Na₂O

proportion%

68-74

12to 16

0.5~ 3.6

0.7~ 1.0

2~ 3

4~ 5